wood crusher

GC-FSD series wood crusher is widely used in pulverizing wooden materials like: trunk, tree branches, cotton stalks, corn stalks, and straw, etc. These materials are shattered into small particles with diameters between 3mm and 5mm, which is the proper size for pelletizing and briquetting. The flowchart of processing biomass materials processing is usually like: Raw Material→Crusher/Hammer mill→Drier→Pellet Mill/Briquette Machine→Packing Machine→Finished Product
This series of wood crusher is an integration of double crushing and screening. The rotor produces high-speed airflow in crushing, and the materials will be accelerated in gas stream.

Wood Crusher GC-FSD with Electric Motor

Technical Parameter of Wood Crusher with Electric Motor

Wood Crusher GC-FSD with Diesel Engine

Wood crusher GC-FSD can also be driven by the diesel engine.

Model GC-FSD-D	Grinder Crusher with Diesel Engine (For raw wood moisture max. 40%)
Capacity (kg/h)	300-500
Diameter of Feeding Material	No more than 150mm
Size of Crushed Material	Max. Ø5×5mm
Diesel Engine	15/18HP
Gross/Net Weight	600/550kg

Wood crusher plays a key role in the preparation of raw materials. And you should notice the followings when buying a wood crusher:

• Turn on the wood crusher and check whether the rotating direction is right or not.
• When the cutters are installed, the knife-edge should extend the cutterhead by 2-4mm. Then tighten the bolts, and stretch the cutter to the same length.
• The worn pressure bolts should be replaced immediately to avoid slip.

If you are interested in our wood crushers or want to know more information about them please do not hesitate to contact us! All of our machines can be customized according to your specific requirements.